Tell you 4 ways to clean your helmet very cleanly at home

Although helmets are everyday items, cleaning them often goes unnoticed. Wearing a dirty helmet can cause issues like scalp irritation and acne, directly affecting your health and daily activities. Let's learn how to clean your helmet at home with Vua Giặt!

Benefits of Keeping Your Helmet Clean

Using a helmet is crucial for safety and adhering to traffic laws. However, in humid tropical conditions, helmets can cause increased oil secretion and sweating, fostering mold and dandruff, which can be itchy and uncomfortable.

Proper helmet cleaning is important to protect your scalp's health, preventing harmful bacteria growth and removing dirt.

How to Clean a Full-face Helmet

Guide to Cleaning the Helmet Visor

The visor protects you from sun, rain, and dust and is crucial for visibility. Over time, it accumulates dirt and fogs up due to moisture. Here's how to clean it thoroughly:

• Step 1: Wet a tissue with warm water mixed with shampoo. Place the damp tissue on the outside of the visor to soften and loosen dirt.
• Step 2: After a while, remove the tissue and use a new one to wipe the outside clean.
• Step 3: Gently clean the inside of the visor with another tissue soaked in water and shampoo, avoiding harsh scrubbing to protect coatings like UV and anti-fog layers.
• Step 4: Use a clean tissue to pat the inside dry and let it air dry naturally.
• Step 5: Once dry, polish the outside of the visor with plastic polish to complete the cleaning process.

Guide to Washing a Helmet with Removable Lining

Cleaning a helmet with a removable lining requires special care. Here are the steps:

• Step 1: Remove the inner linings and wash them separately from the helmet shell. Use the delicate cycle on the washing machine for the linings. Soak the outer shell in warm water.
• Step 2: Add detergent to the water to dissolve grease and dirt. Use a soft brush to clean the helmet shell inside and out until completely clean.
• Step 3: After washing, use tissues to dry the shell and apply some plastic polish to shine the exterior.
• Step 4: Reassemble the cleaned inner parts and lining, then attach the visor.

This completes the cleaning process for helmets with removable linings.

How to Clean a Helmet with Non-removable Lining

Cleaning a full-face helmet with non-removable lining can be more challenging. Here's a step-by-step process:

• Step 1: Start by filling a basin with warm water and fully submerge the helmet. After soaking, add shampoo to the water.
• Step 2: Use a soft brush to scrub the inside of the helmet, focusing on all parts and accessories. Rinse thoroughly by soaking the helmet in clean water.
• Step 3: For the outer shell, use a mild detergent mixed with warm water to remove surface grime. Use a soft cloth to clean the exterior until satisfied. Rinse with warm water.
• Step 4: Use dry tissues to clean the helmet's exterior and apply plastic polish to shine. Reattach the visor and wait for the lining to dry completely before reuse.

Simple Method to Clean a 3/4 Helmet

Like full-face helmets, 3/4 helmets need regular cleaning to prevent bacterial growth and dirt buildup, affecting your health, especially your hair and scalp.

To clean a 3/4 helmet, you'll need:

1. A spray bottle or hose.
2. Shampoo – preferably one you use daily to avoid skin irritation.
3. A small soft-bristled toothbrush.

Steps to clean a 3/4 helmet:

• Step 1: First, remove any attached accessories like visors or cameras. Prepare a basin of clean water, add shampoo to create foam. Ensure the solution is not too diluted for effective disinfection.
• Step 2: Use the spray bottle or hose to spray water directly onto the helmet, ensuring both the inside and outside are thoroughly wetted to remove all dirt. Avoid spraying too forcefully to prevent damage.
• Step 3: Submerge the helmet in the soapy water prepared earlier. Press lightly to ensure even soaking, especially the inner lining where bacteria tend to accumulate.
• Step 4: Use the toothbrush to gently scrub the inside and outside of the helmet, ensuring no areas are missed and avoiding excessive scrubbing.
• Step 5: Continue using the spray bottle to rinse the helmet, removing all shampoo. Repeat until no soap suds remain.
• Step 6: Let the helmet air dry under strong sunlight. If possible, turn it upside down to allow the inner lining to dry quickly. Place a soft towel underneath to support this process.

Once completely dry, reattach the accessories. This completes the easy and effective cleaning process for a 3/4 helmet.

Cleaning a 3/4 helmet is easy and quick.

Effective Method to Clean a Half-face Helmet

Half-face helmets, especially for women who often wear makeup, tend to accumulate more dirt and bacteria. Regular cleaning is essential for health and hygiene.

To clean a half-face helmet, you will need:

1. Shampoo or detergent.
2. A small soft-bristled toothbrush.
3. Warm water.
4. A basin.
5. A dry towel.

Steps to clean a half-face helmet:

• Step 1: Prepare warm water mixed with shampoo. Remove the visor (if any) and soak the helmet in the water, ensuring the inner lining is well-soaked.
• Step 2: Use a soft brush to gently scrub the inside of the helmet, focusing on the areas that come in contact with your face and hair. Avoid excessive force to prevent damage.
• Step 3: Rinse thoroughly with clean water, ensuring no soap residue remains. Repeat if necessary.
• Step 4: Use a dry towel to pat the helmet dry, then let it air dry completely in a well-ventilated area. Avoid direct sunlight as it may damage the helmet material.

Once completely dry, reassemble the visor and any other accessories. This ensures your half-face helmet is clean and ready for use.

Cleaning a half-face helmet is crucial for hygiene and safety.

These four cleaning methods help keep your helmet clean and fresh, protecting your health and ensuring a comfortable ride. Don't forget to maintain regular cleaning routines for your helmet to extend its lifespan and maintain its effectiveness.